Home > News Center > Industry News

News Center

Related news

No search results found!

Automobile stamping parts must be equipped with safety protection devices
2022-11-14 08:40:52

The big feature of metal automobile stamping parts is that they have high dimensional accuracy, are uniform and consistent with the size of the module, and have good interchangeability. They can meet the general assembly and use requirements without further machining, and the appearance of metal stamping parts is smooth and beautiful, which provides convenient conditions for surface painting, electroplating, phosphating and other surface treatment. Therefore, many manufacturers choose this stamping method.


Automobile stamping parts


Metal automobile stamping parts are now very common in China, and there are countless manufacturers of large and small sizes. If the metal stamping parts are not careful during the stamping process, the surface is easily damaged. How to solve this problem?

Install the guards. Due to the small production batch, safety protection devices must be installed in stamping operations that can neither achieve automation nor use safety stamping tools to prevent injury accidents caused by operational errors. Various protective devices have their own characteristics and scope of use, and injury accidents may still occur if they are not used properly. Therefore, the role of various protective devices must be clarified to ensure correct use and safe operation.

Reform the process, mold and operation mode, and realize manual out of mold operation. For mass production operations, we can start with the reform of process and mold to realize mechanization and automation. For example, automated, multi station stamping mechanical equipment, multi cutting tools and mechanized production equipment, continuous die, compound die and other combined process measures are adopted. All these can not only ensure the safety of stamping operation, but also greatly improve the production efficiency.

Reforming stamping equipment to improve production safety and reliability. At present, there are many unsafe factors in the operating system and electrical control system of many old stamping equipment. If they continue to be used, they should be technically modified. Hardware stamping equipment manufacturers shall improve product design to ensure the safety and reliability of stamping equipment.