Home > > Technical Knowledge
  • Is there anything you need to pay attention to when using auto parts?

    2019-07-25 10:31:05
    Automotive parts have a lot of knowledge, so the secret of making automobile parts longer life is somewhat familiar, you may also wish to pay attention to it, which is more conducive to maintaining the safety and stability of the car.Automotive parts have a lot of knowledge, so the secret of making automobile parts longer life is somewhat familiar, you may also wish to pay attention to it, which is more conducive to maintaining the safety and stability of the car.
  • Cautions for Surface Treatment of Automotive Sheet Metal Parts

    2019-07-25 10:28:40
    Notices for surface treatment of automobile sheet metal parts. First: It should be noted that the state of the workpiece, all electrochemical treatment must be carried out in the bulk of the workpiece, the assembly feel that it can not be electrochemical treatment. Because in the process of treatment, the solution will be trapped in the gap of the assembly and cause corrosion to the workpiece.
  • How to distinguish the authenticity of auto parts and accessories products?

    2019-07-25 10:14:00
    The application of automobile stamping parts processing technology is more and more extensive. Many parts, including tools, are stamped by machines. Like automobile lampshade, we all know that the shape of lampshade is elliptical, and the parts of this shape are not easy to produce. Using stamping technology, they can be realized very well.
  • What are the Phenomena of Automobile Stamping Parts in the Production Process?

    2019-07-05 15:25:02
    Automobile stamping parts are obtained under the action of stamping force, so there will be certain deformation, size, shape and other aspects of the corresponding deformation. For stamping parts, sheet metal, die and equipment are the three indispensable elements in the forming process, which play a vital role in the forming quality of stamping parts.
  • What are the Inspection Methods for Stamping Parts of Automotive Parts?

    2019-07-05 15:15:43
    The testing methods for stamping parts of automotive parts are as follows: Touch test: wipe the surface of the outer covering with clean gauze. Inspectors need to wear touch gloves to touch along the stamping part vertically close to the surface of the stamping part. This inspection method depends on the experience of the inspectors. If necessary, the suspicious area can be polished and verified by oil stone, but this method is an effective and rapid inspection method.